Slide/transfer Board Wheelchair Cut Out 
- Brand - Pelican
- Condition - Ageing
- Condition - Amputee
- Length - 32cm
- Swl - 250kg
- Weight - 2.15kg
Used to slide from wheelchair to car, bed, chair, etc. The cut-out is placed around the wheelchair wheel so the board covers more of the seat of the wheelchair. Can be used with a Slide Pad, Handi Lift Walk Belt, Soft Transfer Belt or Car Roller Sheet. This Poly material will bend, but will not break. It is a strong, self lubricating material. The outer surface may mark easily and a new board may look second hand when new, but the advantages of using this material outweighs the disadvantages.
Cleaning: Spray & wipe clean with disinfectant. If more slip is required, use silicon spray Helmar H 4000.
Important Information: Consult your Physiotherapist, Occupational Therapist or Back Care Specialist when using Manual Handling Products.
Some manufacturers have non-slip tape on the back of their Slide Boards (also known as Transfer Boards). The non-slip tape is not really necessary, as the Slide Boards do not move a lot when they are correctly positioned. Non-slip tape can make it harder to position the Slide Board under a patient, and to remove the board after the transfer. If the Slide Board is used upside down, the non-slip tape will stop the person from moving. By not having any non-slip tape the Pelican Slide Boards they can be used either way up.Also the non-slip tape can make it difficult to keep clean, particularly if the patient is incontinent or there may be some other cross infection reason. Remember if the person is sitting on a chair, or on a bed or operating table and the Slide Board is put under them, the Slide Board can be contaminated on both sides i.e. the top and bottom of the Board. This can be from the patient's clothing, and from where they are sitting on the chair, bed, etc. as the chair will also be contaminated. If the non-slip tape is on the underside of the board, it means the board cannot be easily wiped clean. If a customer particularly wants non-slip tape, this can be purchased from most hardware shops and the customer can easily put non-slip tape on the Boards.
Slide the Patient – Not the Board
Remember: Slide the patient across the board. Do not slide the board, with patient on top, across the bed. Hand Slots are designed when carrying the board, not for when transferring patients.